RG27/35/37 Operation • Service • Maintenance
36
Maintenance
Daily or Every 10 Hrs Maintenance Interval
Walk Around Inspection See list
Engine Oil Level Check & Replace if needed
Oil Cooler Clean
Air Cleaner Filter Check
Hydraulic Oil Check
Fuel Tank Check & Fill if needed
Fuel Filter Check
Brake Test Safety Check
Grease & Oil Buildup Remove
Jackshaft Bearings Lubricate
Cutting Wheel Lubricate
Cutter Wheel Bearings Lubricate
Cutting Wheel Teeth Check
After First 10 Hrs Maintenance Interval
Chain Tension
Check & Tighten if needed
V-Belts
Check & Tighten if needed
After First 50 Hrs Maintenance Interval
Hydraulic Oil & Filter Change
Engine Valve Clearance Check
Engine Oil & Filter Change
Every 250 Hrs Maintenance Interval
Hydraulic Oil Filter Change
Self-Propel Wheel Bearings Service
Engine Valve Clearance Check
Battery Check
Engine Fuel Filter Change
Every 500 Hrs or 1 Year Maintenance Interval
Hydraulic Oil Filter Change
Spark Plugs Change
Every 50 Hrs Maintenance Interval
Slewing Ring Grease
SOA Bushings Grease
Pivot Bushings Grease
Blade Bushings Grease
Steering Axle Cylinder Bushings Grease
Steering Axle Pivot Knuckles Grease
Self Propel Rear Axle Flange Bearings Grease
Hydraulic Pump V-Belt Check Tension
Jackshaft V-Belt Check Tension
Engine Oil & Filter Change
Every 100 Hrs Maintenance Interval
Engine Spark Plugs Check
Air Cleaner Filters Clean
Tires & Rims Check
Self-Propel Wheel Engage Pins Apply Oil
Cross-Travel Cylinder Rods Check & Clean if needed
To Next Page
Loading...
Need help?
General
