Raymarine Dragonfly-4 DV - Chart Application Overview and Controls

2.SelectMoveWpts.
Alistofallgroupsisdisplayed.
3.Selectthegroupfromthelistthatyouwantto
movethewaypointstoo.
Aconrmationdialogisdisplayed.
4.SelectYestomovethewaypointsorNoto
cancel.
Thewaypointshavenowbeenmovedtothenew
group.
Erasingallwaypointsinagroup
Youcaneraseallwaypointsinaselectedgroup.
Withthewaypointgroupslistdisplayed:
1.Selectthegroupthatcontainthewaypointsyou
wanttoerase.
Alistisdisplayedshowingallwaypointsinthe
selectedgroup.
2.SelectEraseWpts.
Aconrmationdialogisdisplayed.
3.SelectYestoeraseallwaypointsinthegroup,or
Notocancel.
Allofthewaypointsintheselectedgroupareerased
fromthesystemandthegroupwillnowbeempty.
Erasingawaypointgroup
Beforeyoucaneraseawaypointgroupyoumust
moveoreraseallthewaypointsassignedtothat
group.
WiththeWaypointGroupdisplayed:
1.Selectthewaypointgroupthatyouwanttoerase.
2.SelectEraseGroup.
Thegroupisdeletedfromthesystem.
Waypointinformation
Whenyoucreateawaypoint,thesystemassigns
informationregardingthelocationmarked.Youcan
viewandeditthedetailsofanywaypointthathas
beencreatedandstored.
Thefollowinginformationisassignedorcaptured
foreachwaypoint:
•Symbol(adefaultsymbolisassigned,oryoucan
selectanalternative.)
•Name(adefaultnameisassigned,oryoucan
selectanalternative.)
•Position(LatitudeandLongitudeofthewaypoint.)
•BearingandRange(Bearingandrangefrom
vessel.)
•Temperature(requiresappropriatesensor,only
forwaypointscapturedatthevesselposition.)
•Depth(requiresappropriatesensor,onlyfor
waypointscapturedatthevesselposition.)
•Dateandtime
•Comment(youcanaddyourowntextcomments
toawaypoint.)
Fromthewaypointinformationpageyoucanalso
performthefollowingactions:
•Goto(Startactivenavigationtothewaypoint.)
•ShowonChart(Showthewaypointlocationin
thechartapplication.)
•Delete(Deletethewaypointfromthewaypoints
list.)
Editingwaypointdetails
WiththeWaypointListdisplayed:
1.Selectthewaypointyouwanttoedit.
Thewaypointinformationpageisdisplayed.
2.Selecttheeldyouwanttoedit.
3.Usetheon-screenkeyboardtomakethe
changes,thenselecttheon-screenkeyboard's
SAVEbutton.
Editingawaypointusingthecontextmenu
Withtheapplicationpagedisplayed:
1.Selectthewaypointsymbolon-screen.
Thewaypointcontextmenuisdisplayed.
2.SelectEditWaypoint.
Theeditwaypointdialogisdisplayed.
3.Selecttheeldyouwanttoedit.
Chartapplication
77