Chapter 4: Main Menu 31
The range mode must be set to MANUAL before the range will change.
Press UP, DOWN, or MENU.
Pressing on the RANGE key or pressing the MENU key opens the
Range field in the MAIN MENU so you can make the change if desired. If you
wish to remain in Automatic Range mode, press QUIT.
The following range/shift values are available:
The default setting is AUTOMATIC.
Table 4-2: Range Values
Feet Fathoms
Meters (CE
models only)
51 2
10 2 4
15 3 6
20 4 8
30 6 10
40 8 15
50 10 20
60 15 25
80 20 30
100 25 40
150 30 50
200 40 60
250 50 80
300 60 100
400 80 150
600 100 200
800 150 300
1000 200 400
1500 250 500
2000 300 600
or
To Next Page
Loading...
