Raymarine e125 - Enabling Autopilot Functions; Enabling AIS Functions

6.10Enablingautopilotfunctions
Withthehomescreendisplayed:
1.SelectSet-up.
2.SelectSystemSettings.
3.SelectAutopilotControlsothatOnishighlighted.
SelectingAutopilotControlswitchesthecontrolOnandOff.
4.SelectBacktoreturntotheSystemSettingsmenu.
5.SelectPilotControls.
Ifthismenuoptionisdisabled,noautopilothasbeenfound.
Checkthephysicalconnections,thenrepeatsteps1to5
above.
6.ThePilotControldialogisdisplayed,indicatingthatpilot
controlisenabledandanautopilotisdetected.
6.11EnablingAISfunctions
BeforeproceedingensureyourAISunitisconnectedtoNMEA
Port1.
Withthehomescreendisplayed:
1.SelectSet-Up.
2.SelectSystemSettings.
3.SelectNMEASet-Up.
4.SelectNMEAInputPort1.
5.SelecttheAIS38400option.
6.SelectBacktoreturntotheSystemSettingsmenu.
7.SelectExternalDevices.
8.SelectAISUnitSet-up.
TheAISUnitSet-upmenuisdisplayed.
9.AdjusttheAISoptionsasappropriate.
80NewaSeries/NewcSeries/NeweSeries