What to do if my Raymarine Radio has no GNSS signal?
If your Raymarine Radio indicates an internal fault such as no GNSS signal, no antenna, or a lost signal, check the connection to the GNSS antenna and ensure there are no obstructions blocking the signal.
What to do if Raymarine E70492 Radio GPS sensor is initializing or not ready?
If the GNSS (GPS) sensor on your Raymarine Radio is initializing or not ready, allow time for the GPS sensor to initialize properly.
What to do if Raymarine Radio VHF transceiver module initializing / not ready?
If the VHF transceiver module on your Raymarine Radio is initializing or not ready, wait for the module to complete the initialization process.
General| Product Number | E70492 |
|---|---|
| Type | VHF Marine Radio |
| Transmitter Power | 25W/1W |
| DSC | Class D |
| GPS | Yes |
| NMEA2000 | Yes |
| NMEA0183 | Yes |
| Frequency Range | 156.025 MHz to 163.275 MHz |
| Waterproof Rating | IPX7 |
| Display | LCD |
Guidance on obtaining an MMSI number for the vessel.
Instructions on how to check for and perform software updates.
Guidance on choosing a suitable location for the unit.
Tools required and instructions for mounting the base station and speakers.
Detailed instructions for connecting the power supply.
Identifies and describes the controls on the handset.
Steps for initial radio configuration after power-up.
Step-by-step guide to programming the MMSI number.
How to enter the ATIS ID for European inland waterways.
Configuring GNSS settings and displaying position information.
Information on connecting and managing wireless handsets.
Overview of DSC functionality and call categories.
Procedures for making and managing distress calls.
How to make and receive urgency calls.
How to make and receive safety calls.
Enabling/disabling ATIS and understanding Marcom-C mode.
Routine checks and cleaning instructions for the unit.
Solutions for common power-up issues.
To Next Page
