What to do if my Raymarine RAY90 Radio has no GNSS signal?
If your Raymarine Radio indicates an internal fault such as no GNSS signal, no antenna, or a lost signal, check the connection to the GNSS antenna and ensure there are no obstructions blocking the signal.
What to do if Raymarine Radio GPS sensor is initializing or not ready?
If the GNSS (GPS) sensor on your Raymarine Radio is initializing or not ready, allow time for the GPS sensor to initialize properly.
What to do if Raymarine Radio VHF transceiver module initializing / not ready?
If the VHF transceiver module on your Raymarine Radio is initializing or not ready, wait for the module to complete the initialization process.
What to do if Raymarine Marine Radio will not boot up and is stuck in a re-boot loop?
If your Raymarine Marine Radio is stuck in a re-boot loop, consider the following: * **Power Supply and Connection:** Refer to the solutions for the problem 'Product does not turn on or keeps turning off' for troubleshooting steps. * **Software Corruption:** In the event that the product's software has become corrupted, try re-flashing the latest software from the Raymarine website.
Guidelines and recommendations for safe and proper product installation.
Instructions and warnings for obtaining and entering the vessel's MMSI number.
Requirements for choosing a suitable installation location, considering ventilation and interference.
Guidelines for antenna placement and exposure to electromagnetic energy.
Tools required and steps for mounting the Base station, speakers, and handset holster.
Instructions for connecting the radio to a 12V DC power supply, including fuse ratings.
Guidance on connecting suitable GNSS and VHF antennas to the Base station.
Explanation of the buttons and functions on the wired handset.
Instructions on how to power on and off the Base station and handset.
Steps for configuring the radio upon first use, including language and network settings.
Procedure for entering the vessel's MMSI number to enable DSC functions.
Steps for manually entering the ATIS ID for inland waterway use.
Configuration of the GNSS receiver, including data source and manual entry.
Step-by-step guide to pairing the wireless handset with the wireless hub.
Procedure for pairing a wireless speaker with a wireless handset.
Explanation of DSC functionality, call categories, and prioritization.
Procedures for making and cancelling distress calls, including Mayday.
How to make and receive urgency calls (PAN PAN).
How to make and receive safety calls (SECURITE).
Setting up Dual watch and Triple watch modes for monitoring channels.
How to use the loud hailer function for amplified voice broadcast.
Using the fog horn in manual and automatic modes with different patterns.
Interpreting LED indicator sequences for diagnosing base station issues.
Understanding LED indicators for troubleshooting the wireless speaker.
Steps to reset the radio to factory defaults, including data loss warnings.
Solutions for common problems related to powering on or keeping the unit on.
Common issues with DSC functions and passive speaker audio.
Solutions for problems related to GPS fix and position data.
Guidance for resolving issues with wireless handset connection and performance.
To Next Page
General
