What to do if my Raymarine Two-Way Radio will not boot up?
If your Raymarine Two-Way Radio won't boot up and is stuck in a reboot loop, the issue might stem from the power supply or connection. Please refer to the solutions provided for the problem 'Product does not turn on or keeps turning off'. Alternatively, the software might be corrupted. In this case, try re-flashing the latest software from the Raymarine website.
General| Waterproof Rating | IPX7 |
|---|---|
| Supply Voltage | 12V DC |
| GPS Interface | NMEA0183 |
| Type | Fixed Mount |
| Power Output | 25W |
| Channels | USA, International, Canadian |
| DSC | Class D |
| Display | LCD |
| Operating Voltage | 10.8V - 15.6V |
Crucial warnings for safe installation and operation, covering electrical, ignition, and environmental hazards.
Information on obtaining and using the 9-digit MMSI for DSC equipment and its importance.
Key factors for selecting an installation location, including EME and compass safe distance.
Detailed instructions for connecting the power supply, including fuse and breaker ratings.
First-time setup procedures including language, MMSI, and ATIS configuration.
Guide to programming the vessel's unique MMSI number for DSC functionality.
Configuring GPS/GNSS settings and displaying location data.
Introduction to DSC, its role in GMDSS, and call prioritization.
Detailed procedures for making, cancelling, and receiving distress calls.
General guidance on diagnosing and correcting common installation problems.
Steps to reset the system to factory defaults, excluding MMSI/ATIS.
Solutions for issues related to the product not turning on or rebooting.
Common problems and solutions for VHF radio functions like DSC and sensitivity.
Troubleshooting GPS/GNSS fix, data, and connection issues.
To Next Page
