Raymarine RAY90 - GNSS (GPS) Set Up

5.15GNSS(GPS)setup
IfyourradioincludesaninternalGNSS(GPS)receiverorifyourradioisconnectedtoareceiverover
NMEA0183orSea Talkng®,theradiocandisplayrelevantpositioninformation.
Thefollowinginformationcanbedisplayed:
•latitude
•longitude
•UTCtime
•COGandSOG
Whenpositiondataisavailablethesatelliteiconisdisplayedonscreen.
Ifnopositiondataisavailablethenthelatitude,longitudeandtimecanbeenteredmanuallysothatit
canbeincludedinDSCdistresstransmissions.
PositiondatareceivedfromothervesselscanbedisplayedonaconnectedRaymarine®multifunction
display.
EnablinganddisablingtheinternalGNSS(GPS)
FromtheGPSset-upmenu:Menu>Set-up>GPSset-up
1.Select
IntegratedGPS.
Selecting
IntegratedGPSwillswitchtheradio’sinternalGNSSreceiverOnandOff.
GNSSdatasource
Y ourradioincludesabuilt-inGNSS(GPS)receiverthatcanbeusedtoobtainpositiondata.Your
radiocanalsousepositiondatafromaGNSS(GPS)receiverconnectedtothesameSea Talkng®or
NMEA2000network.
Ifyourradio’sinternalreceivercannotobtainapositionfixorifyourradio’sinternalreceiveris
switchedoffthenanetworkdatasourceforshallbeusedinstead,ifavailable.
Nopositiondata
Ifnopositiondataisavailableorpositiondatabecomesunavailable;after10minutesanaudible
warningissounded,theGNSS(GPS)iconflashesandtheNopositiondatamessageisdisplayed.
OncethewarninghasbeenacknowledgedtheGNSS(GPS)iconwillcontinuetoflash.TheNo
positiondatawarningisrepeatedevery4hoursifpositiondataisstillunavailable,hasnotbeen
enteredmanuallyorhasbeenenteredmanuallybutover23.5hoursago.
Ifpositiondatahasbeenenteredmanuallythedisplayalternatesbetweendisplayingthemanual
positionandtimeandtheManualPositionmessage.ifthemanuallyenteredpositionhasnotbeen
updatedinthelast4hourstheGNSS(GPS)iconflashesandanaudiblewarningissounded.This
warningwillberepeatedevery4hoursuntilpositionismanuallyupdatedorpositiondatabecomes
available.
Wherenopositiondataisavailableorhasnotbeenmanuallyupdatedfor23.5hoursthenposition
datawillchangeto‘9’sandtimewillchangeto‘8’s.
Enteringpositionmanually
IfGNSS(GPS)positiondataisnotavailableitcanbeenteredmanually.
SelectSetmanualpositionfromtheGPSset-upmenu:Menu>Set-up>GPSset-up>Setmanual
position.
1.Usethe
ChannelUpandChannelDownbuttonstocyclethroughtheavailablenumbersand
press
OKtoconfirmeachnumberandmovetothenextdigit.
2.Whentherelevantinformationhasbeenenteredselect
OKtoconfirmthedetails.
Selecting(GNSS)GPSinformationtodisplay
Y oucanchangetheGNSS(GPS)datathatisdisplayedontheHomescreen.
Fromthe
GPSset-upmenu:Menu>Set-up>GPSset-up.
1.Select
Homescreendisplay.
SelectingHomescreendisplaywillswitchbetween
Location&timeandLocation&COG/SOG.
90