54
Setup Instructions
Fig. 4-9
System Setup
Display
Once you have moved to the correct line, press the < or > arrows on the
Page control pad to change the entry. When you leave the display, the
unit will store any changes you have made.
Simulator This unit has a built-in simulator. When the simulator is
enabled, it presents a realistic display. You can use this
display to learn about the features of the unit without
operating your boat. The information on this display is
generated by the unit itself, and does not come from a
transducer. When this mode is turned on, you will see the
word “Simulation” flashing on the display.
Fish symbol When the unit detects a fish, it can show this using a fish
symbol. A number above the symbol shows the depth of the
fish. The size of the symbol is related to the size of the fish.
In general, the larger the symbol, the larger the fish. (For
more information, see the section on “Fish Indications.”)
When the fish symbol is turned off, the unit indicates a fish
by showing an arch-shaped line. See Fig. 3-5. This kind of
display does not include the depth readings for the fish.
White line This feature controls the way the unit displays strong and
weak echoes. When the white line feature is turned off, all
To Next Page
Loading...
Need help?
General
