L750 Fishfinder: Installation and Operation Handbook
30
Alarms
The Fishfinder has a deep-water alarm, a shallow-water alarm, and a
“Fish” alarm which is triggered when fish are present. This button allows
you to set these alarms.
Enter
After you make a change in a menu, press Enter to record the change
and return to the normal display.
Clear
If you make a change, but do not want to save it, press Clear.
Menu
The Menu button allows you to set up several functions on the unit. It
also allows access to the System Setup menu, which allows you to set
up additional functions.
Turning the Power On and Off
Turning the Power On – Initial Use
When you turn on the power to the Fishfinder for the first time, the unit
will ask you for some set-up information. This only happens once.
The unit will present a list of languages. The displays and set-up
information for the unit will be presented in the language you choose.
Here are the choices:
English (U.S.A.) English (U.K.)
Espanol Francais
Deutsch Italiano
Svenska Norska
The units used to measure temperature, depth and speed also depend
on the language. See the table below. (The default setting is “U.S.A.”)
Option Temp. Units Depth Units Speed Units
U.S.A. °F feet miles per hour
English (U.K.) °C feet miles per hour
Other European
languages °C meters kilometers per hour
To Next Page
Loading...
