Need help?Do you have a question about the Raymarine L365 and is the answer not in the manual?
General| Display Resolution | 240 x 320 pixels |
|---|---|
| Transducer Frequency | 200 kHz |
| Power Output | 150W RMS |
| Display | Color LCD |
| Waterproof Rating | IPX7 |
| Display Size | 3.5 inches |
| Depth Capability | 600 ft (183 m) |
Describes the system's purpose, capabilities, and components.
Details the basic parts of the FishFinder system.
Lists the components provided in the product box.
Lists the types of transducers that may be included.
Lists optional parts available for purchase.
Details the function and importance of the transducer.
Guides users on choosing the right transducer for their needs.
Instructions for assembling the transducer mounting bracket.
Guidelines for selecting the best location for the transom-mount bracket.
Step-by-step guide for mounting the transom-mount transducer.
Instructions for attaching the Sidelooker transducer.
Key points for installing a thru-hull transducer.
Key points for installing an in-hull transducer.
Key points for installing a transducer on a trolling motor.
Notes for installing speed and temperature transducers.
Instructions for mounting the display using the standard bracket.
How to remove the display unit from its bracket.
Instructions for flush-mounting the display unit.
Guide for routing and securing the transducer cable.
Specifics for connecting Sidelooker transducer cables.
How to connect separate speed and temperature sensors.
Instructions for connecting the unit to the boat's power.
Procedure for calibrating speed and temperature sensors.
Explains the function of buttons on the display unit.
How to power the unit on and off.
Describes how settings are stored and default values.
How to adjust screen brightness and contrast.
How to navigate between different display modes.
Lists and describes the different operating modes.
Detailed explanation of the main operating display.
Explains the different frequencies and their uses.
Explains how fish are displayed and interpreted.
Explains how different bottom conditions are displayed.
Introduces Zoom and A-Scope modes.
Explains the magnified view feature.
Details the real-time sonar data display.
Displays depth, speed, log, and temperature numerically.
Explains the display for the optional Sidelooker transducer.
How to navigate and access setup options.
How to set the measurement depth range.
How to adjust the unit's sensitivity.
How to adjust the display's scrolling speed.
How to configure the zoom feature.
How to select the operating frequency.
How to reset the distance traveled log.
Overview of the system setup menu.
Specific setup steps for the Sidelooker feature.
How to restore all settings to their original values.
Lists the factory preset default settings.
How to clean the display, cable, and transducer.
General advice for diagnosing common problems.
Steps to diagnose and fix power issues.
Troubleshooting steps for when the display stops responding.
How to identify and fix sources of interference.
Diagnosing issues with depth readings.
Troubleshooting steps for incorrect speed/log data.
How to service a thru-hull transducer while the boat is in water.
Information on contacting Raymarine for support and parts.
Contact details for technical assistance.
Procedures for obtaining product repair.
Contact and service information for Europe.
Steps for returning a unit for warranty repair.
General specifications of the display panel and modes.
Lists and details various functions of the FishFinder.
Diagrams showing pinouts for power and transducer connectors.
Contact and location details for service centers.
To Next Page