Chapter 2: Installation 17
Battery Tray
➤ To open the Battery Tray and insert the battery cells:
1. Lift the fastener at the base of the unit and rotate counterclockwise ¼ turn to
the UNLOCK position.
2. While holding the Ray101 in one hand, use the other hand to push the battery
tray downward and then away to separate it from the back of the radio.
3. Lift up the tab located on the center right side of the battery tray cover and
remove it from the battery tray.
4. Locate the Battery Type switch just below the battery compartment and turn
to the appropriate position: ALKALINE or Ni-MH.
REMOVE
ATTACH
1
1
2
D6696-2
2
To Next Page
Loading...
