EasyManua.ls Logo

Raymarine Ray101 User Manual

Raymarine Ray101
66 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Ray101
Handheld VHF
Marine Radio
Owner’s Handbook
Document number: 81229-3
Date: January 2005

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Raymarine Ray101 and is the answer not in the manual?

Raymarine Ray101 Specifications

General IconGeneral
TypeVHF Marine Radio
Power Output25W / 1W
Waterproof RatingIPX7
Display TypeLCD
GPS InterfaceNMEA0183
DSCYes

Summary

Important Information

Safety Warnings

Provides critical safety advice for navigation and battery/charger usage.

WARNING: Alkaline Battery Use

Warns about using alkaline batteries in the charger and potential hazards.

Chapter 2: Installation

Battery Tray

Details on opening, inserting batteries, and using the battery tray.

Charging Rechargeable Ni-MH Cells

Instructions for charging the Ni-MH batteries, including initial charge and caution.

Charger LED

Explains the status indicators of the charger's LED during charging.

Chapter 3: Getting Started

3.1 Keypad and Rotary Knobs

Identifies and describes the function of the radio's keys and knobs.

Rotary Keys

Details the function of the PWR/VOL and SQ rotary knobs.

Push Keys

Lists and describes the functions of the radio's push keys.

Description

Provides detailed descriptions of key controls like PWR/VOL, SQ, and PTT.

3.2 LCD Display

13. Indicators

Explains special indicators like WX, ALERT, HI/LO, DUAL, TRI, ATIS.

14. Signal Strength

Displays the relative strength of TX and RX signals.

Chapter 4: Operating the Radio

4.1 Turning the Power ON and OFF

Step-by-step instructions for powering the radio on and off.

4.2 Setting the Volume

How to adjust the loudspeaker volume using the PWR/VOL knob.

4.3 Setting the Squelch

How to adjust the squelch threshold to reduce background noise.

4.4 Setting the Power Output

Instructions for switching between high and low transmit power.

Overriding the Low Output Power Restriction (US only)

How to temporarily override low power settings on specific channels in the US.

4.5 Setting the Channel

How to change the radio channel using the UP/DOWN keys.

4.6 Selecting a Weather Channel

How to access and switch between NOAA weather channels.

Weather Alert Operation

How the weather alert function works and how it alerts the user.

4.7 Setting the Frequency Band

How to switch between US, International, and Canadian channel sets.

4.8 Selecting Priority Mode

How to activate Priority Mode to monitor Channel 16.

4.9 Selecting the Secondary Priority Channel

How to select and reprogram the Secondary Priority Channel.

Reprogramming the Secondary Priority Channel

Step-by-step guide to change the default Secondary Priority Channel.

4.10 Transmitting

How to transmit using the PTT key and information on the transmit timeout timer.

4.13 Using the Scan Modes

All Scan

How to activate and use the All Scan mode.

Saved (Memory) Scan

How to activate and use the Saved (Memory) Scan mode.

Priority All Scan

How to initiate Priority All Scan from All Scan mode.

Priority Saved Scan

How to initiate Priority Saved Scan from Saved Scan mode.

4.14 Adding Channels to Memory

To delete channels from memory

Steps to remove channels from the radio's memory.

4.15 Using the Monitor Modes

Dual Watch

How to activate and use the Dual Watch mode.

4.16 USER Channel Mode

4.17 Resetting Factory Defaults

Appendix A: Specifications

Appendix B: Channel List

Related product manuals