Raymarine Ray101 - 4.14 Adding Channels to Memory; To delete channels from memory

Chapter 4: Operating the Radio 41
4.14 Adding Channels to Memory
The Ray101 can store any channel except the weather channels. The stored
channels are the ones scanned in the Saved (Memory) Scan mode.
➤ To add channels to memory:
1. During normal operation mode, use the UP/DOWN key to select the desired
channel for programming.
2. Press and hold the
SCAN/SAVE key for 3 seconds.
The SAVED icon appears to indicate the current channel has been saved in
memory. Any number of channels can be saved as memory channels. Separate
memory channel groups exists for USA, International, and Canadian frequency
sets.
➤ To delete channels from memory:
1. During the normal mode, use the UP/DOWN key to select the channel to be
deleted.
2. Press and hold the SCAN/SAVE key for 3 seconds.
The selected channel is deleted from memory. To view the channels set in memory,
switch to USER mode, as described in
Section 4.16, USER Channel Mode .
D6704-1