Need help?Do you have a question about the Raymarine SeaTalk and is the answer not in the manual?
Critical warnings on correct installation and operation to prevent injury and damage.
Emphasizes switching off power before installation to ensure electrical safety.
Highlights product as an aid, stressing the need for judgment and constant watch.
Details adherence to Electromagnetic Compatibility standards for marine use.
Explains disposal guidelines for electronic waste according to the WEEE Directive.
Notes about the handbook's accuracy and potential for specification changes.
Lists all components included in the SeaTalk Remote Keypad package.
Explains fundamental usage and key functions of the Remote Keypad.
Details the specific functions assigned to each button on the keypad.
Describes how instruments indicate remote control status and how indicators are displayed.
Provides general operational details, including beeps and illumination.
Covers servicing recommendations, safety precautions, and cabling checks.
Advises on authorized servicing and general safety for Raymarine equipment.
Recommends periodic inspection of cables for damage and replacement if necessary.
Provides contact information for product support and advice.
Offers troubleshooting steps for common issues like keypad or instrument malfunctions.
Troubleshooting guide for when the remote keypad is unresponsive.
Solutions for instruments not responding in the correct order or grouping.
Addresses issues where multiple instruments activate simultaneously.
Troubleshooting steps for when instruments fail to respond to remote commands.
Guides on selecting the best position and preparing for installation.
Provides guidelines for optimal Electromagnetic Compatibility during installation.
Explains the use and importance of cable suppression ferrites.
Details requirements for connecting Raymarine equipment to other devices.
Lists the necessary tools for installing the Remote Keypad.
Outlines the physical location requirements for installing the keypad.
Step-by-step instructions for physically mounting the SeaTalk Remote Keypad.
Instructions on how to connect the Remote Keypad to the SeaTalk system.
Explains how to establish a SeaTalk link for autopilot functionality.
Final checks recommended before operating the equipment at sea.
Final check for EMC compatibility and potential external influences.
Explains the concept and benefits of organizing instruments into groups.
Provides detailed steps for creating groups of standard Raymarine instruments.
Guides on how to group ST80 MaxiView instruments for remote operation.
Outlines the general terms and conditions of the product warranty.
Details the process for requesting warranty service for the product.
Explains how to obtain standard warranty service.
Describes provisions for onboard warranty service for eligible products.
Lists conditions and situations not covered by the warranty.
Covers warranty transferability and legal disclaimers.
Details Raymarine's warranty for new products regarding materials and workmanship.
Explains the terms for onboard warranty service and its conditions.
Instructions for customers to contact support for warranty claims.
Specifies limitations and exclusions applicable to the warranty policy.
Provides contact information for Raymarine support in North and South America.
Lists contact details for Raymarine support in Europe, Middle East, Africa, and Australasia.
Advises customers on what information to provide for faster service.
General| Connectivity | SeaTalk |
|---|---|
| Power Supply | 12V DC |
| Storage Temperature | -20°C to +70°C |
| Humidity | 95% RH |
| Connector | SeaTalk |
To Next Page
