Rate gyro fault Safety alarm.
Current limit Safety alarm.
Rudder feedback unit fault Safety alarm.
Autolearn fail 1 (not carried
out)
Safety alarm.
Autolearn fail 2 (manual inter-
vention)
Safety alarm.
Autolearn fail 3 (compass or
drive error)
Safety alarm.
Autolearn fail 4 Safety alarm.
Autolearn fail 5 Safety alarm.
Autolearn fail 6 Safety alarm.
Turn rate too high Safety alarm. Indicates an exces-
sive turn rate when calibrating the
fluxgate compass. May appear in
Calibration mode.
Change calibration stage.
Reduce turn rate.
Low battery
No navigation data Absence of one of the following:
Compass (Auto, Track and Wind
Trim modes).
XTE (Track mode).
Wind angle (Wind Trim mode)
MOB
Pilot start up
Waypoint advance Indicates change of waypoint when
in Track mode.
Change mode.
Accept new waypoint/leg.
Waypoint advance Turn to
port
Waypoint advance Turn to
starboard
No wind data
No speed data
Drive short
Clutch short
Solenoid short
Alarm Description Action
To Previous Page
Loading...
