Raymarine ST70 Pilot - ST70 Pilot Dodge Feature; Dodge in Auto Mode; Dodge in Track Mode

The Dodge feature allows you to leave your current mode and go to Standby in order to tem-
porarily change course.
Once you have changed course you have the choice of continuing on the new course or
returning to your previous heading.
If your ST70 pilot is not connected to a compatible course computer, pressing
DODGE will sim-
ply take the pilot to Standby.
Using Dodge in Auto mode
When in Auto mode, press DODGE .(requires a dodge compatible
chartplotter).
The DODGE popup will appear over whichever pilot view you
have currently selected.
Once you have finished steering manually you can:
•Press
DODGE to return to the previous heading, or
•Press
AUTO to continue on your new heading.
Using Dodge in Track mode
When in Track mode, press DODGE .
The DODGE popup will appear over whichever pilot view you
have currently selected.
Once you have finished steering manually you can:
•Press
DODGE to track from here to the next waypoint, or
•Press
AUTO to return to the previous track.
Note: The Dodge when in Track mode feature on only available on compati-
ble multifunction displays.
M
WE
S
N
SOG KTS
14.8
Depth M
6.2
TWS KTS
19.1
DODGE
DODGE
AUTO
follow last
heading (300°)
follow this
heading (272°)
D
10933-1
M
WE
S
N
SOG KTS
14.8
Depth M
6.2
TWS KTS
19.1
DODGE
DODGE
Track from here
Resume current
Track
TRACK
D
10932-1
ST70 Pilot - using dodge
Using the Dodge featur e
Card
4