Need help?Do you have a question about the Raymarine ST1000 Plus Tiller Pilots and is the answer not in the manual?
General| Power Supply | 12 V DC |
|---|---|
| Max Boat Length | 10 m |
| Display Type | LED |
| Auto Tack | Yes |
| Auto Steer to Wind | Yes |
| SeaTalk Compatibility | Yes |
| Model | ST1000 Plus |
| Interface | SeaTalk |
| Waterproof Rating | IPX6 |
| Thrust | 57 kg |
| Operating Temperature | -10°C to +55°C |
| Weight | 1.5 kg |
| Voltage Range | 10 V DC to 16 V DC |
| Maximum Boat Displacement | 3, 000 kg |
| Drive Type | Linear Drive |
Outlines essential safety warnings and guidelines for operating the autopilot.
Explains how to engage and disengage the autopilot in Auto mode.
Step-by-step guide to activating the Auto mode for steering.
Instructions for returning the tiller pilot to manual steering.
Covers the operation of the tiller pilot for navigating between waypoints.
Details how to use the tiller pilot for wind-assisted steering.
A troubleshooting guide to identify and resolve common issues.
Guidance on planning the installation, including checking supplied parts.
Details the process for installing the tiller pin and mounting socket.
Key measurements required for correct tiller pilot installation.
Covers the installation of the waterproof plug and socket for data and power.
Tests to verify the system is operating correctly after installation.
Guidance for conducting a sea trial to calibrate the compass.
Steps for calibrating the internal compass for accurate readings.
To Next Page