22 ST1000 Plus & ST2000 Plus Tiller Pilots - Owner’s Handbook
2 Using the Tiller Pilot
Waypoint advance
The waypoint advance alarm sounds whenever the target waypoint
number changes:
• the pilot continues on its current heading, and the display
alternates between the bearing to the next waypoint and the
direction the boat will turn to take up that bearing
• make sure that the turn will be safe and, when you are ready to
make the turn, momentarily press
-10 and +10 together.
• the pilot will turn onto the new bearing and track towards the next
waypoint
Note: Waypoint advance will only operate if your pilot receives valid
bearing to waypoint and waypoint number information.
D208-2
81130_3.book Page 22 Wednesday, July 25, 2001 11:57 AM
To Next Page
Loading...
