Chapter 2: Using the Tiller Pilot 9
2 Using the Tiller Pilot
Changing course
In Auto mode, use the -1 and -10 (port) and +1 and +10 (starboard)
keys to change course in steps of 1° and 10°.
For example: press -10 three times for a 30° course change to port:
Port Starboard
oror
D3320-2
D3254-2
Original
course
30˚ to port
81130_3.book Page 9 Wednesday, July 25, 2001 11:57 AM
To Next Page
Loading...
