Chapter 5: Commissioning the Tiller Pilot 53
5 Commissioning the Tiller Pilot
Navigation error screens
If the display shows either of the following error displays, the cause is
either:
• a wiring error, or
• the navigator is not configured to transmit the required data
format
Track data not received
This error message indicates that data has not been received. The
most likely reason is a cabling error – either open circuit, short circuit
or wires reversed.
Track data error
This error message indicates that the navigator has lost its fix. Refer to
the navigator handbook for further action.
D3268-2
D3269-2
81130_3.book Page 53 Wednesday, July 25, 2001 11:57 AM
To Next Page
Loading...
