Raymarine ST70 Pilot - ST70 Pilot View Selection; Displaying Pilot Views; Changing Pilot Views

Use these instructions to select the pilot view you want.
Selecting a view
Displaying the pilot views
1. With any operational page displayed, press and hold
MENU to display Heading View .
2. Press and hold MENU again to display 2D - Compass
Rose View.
3. Press and hold
MENU again to display 3D - Isometric View.
Changing the pilot view
1. Press and hold MENU to cycle through the different views.
2. Release the
MENU button when the view you want is displayed.
Mag
225
D10931-1
M
WE
S
N
SOG KTS
14.8
Depth M
6.2
TWS KTS
19.1
D10935-1
M
SOG KTS
14.8
Depth M
6.2
TWS KTS
19.1
N
D10930-1
ST70 Pilot - selecting the view
Selecting the Pilot View
continued ...
Card
2