Raypak 8350 Series User Manual

INSTALLATION & OPERATING
INSTRUCTIONS
Catalog No. RP6000.552F Effective: 11-22-13 Replaces: 06-28-13 P/N 241377 Rev. 8
92-103778-03-10
FOR YOUR SAFETY: Do not store or use gasoline or other flammable vapors and
liquids or other combustible materials in the vicinity of this or any other appliance. To
do so may result in an explosion or fire.
Model Series
5350, 6350,
6350HC, 8350,
8350HC & 8360
Heat Pump
Pool & Spa
Heater
USC
L
I
S
T
E
D
R
NOTE: The instructions in this manual are for the use of qualified individuals specially trained and experienced
in the installation and maintenance of this type of equipment and related system components. Installation and
service personnel are required by some states to be licensed. Persons not qualified shall not attempt to install,
service, or maintain this equipment.
This manual should be maintained in legible condition and kept adjacent to the heat pump pool heater or in a
safe place for future use.

Raypak 8350 Series Specifications

General

Brand	Raypak
Model	8350 Series
Category	Heat Pump
Language	English

Summary

Safety Warnings & Precautions

Water Temperature Safety

Chemical Safety Precautions

Refrigerant Safety

Installation Site Considerations

Placement and Clearance Requirements

Installation Clearances & Electrical

Electrical Connection Guidelines

Requirements for wiring, compliance with codes, and need for licensed electricians.

Water Connections & Pressure Drop

Plumbing the Water Connections

Step-by-step guide for connecting water inlet and outlet lines correctly.

Heat/Cool Mode Operation

Selecting Heat or Cool Mode

Steps to choose between heating and cooling modes for specific models.

Troubleshooting Common Issues

Troubleshooting: Unit Running, No Heating

Checks to perform when the unit is operating but not heating the pool water.

Troubleshooting: Unit Not Running or Condensation Issues

Troubleshooting: Unit Not Running

Wiring Diagrams - Analog Models

Analog Single-Phase (208/230V) Wiring

Detailed wiring diagram for single-phase, 208/230V analog control units.

Wiring Diagrams - Digital Models

Digital Single-Phase (208/230V) Wiring

Detailed wiring diagram for single-phase, 208/230V digital control units.

Wiring Diagrams - Three-Phase Analog Models

Analog Three-Phase (208/230V) Wiring

Detailed wiring diagram for three-phase, 208/230V analog control units.

Wiring Diagrams - Three-Phase Digital Models

Digital Three-Phase (208/230V) Wiring

Detailed wiring diagram for three-phase, 208/230V digital control units.

Wiring Diagrams - 460V Three-Phase Analog Models

Analog Three-Phase (460V) Wiring

Detailed wiring diagram for 460V three-phase analog control units.