Raypak 6350 Series User Manual

INSTALLATION & OPERATING
INSTRUCTIONS
Catalog No. RP6000.552F Effective: 11-22-13 Replaces: 06-28-13 P/N 241377 Rev. 8
92-103778-03-10
FOR YOUR SAFETY: Do not store or use gasoline or other flammable vapors and
liquids or other combustible materials in the vicinity of this or any other appliance. To
do so may result in an explosion or fire.
Model Series
5350, 6350,
6350HC, 8350,
8350HC & 8360
Heat Pump
Pool & Spa
Heater
USC
L
I
S
T
E
D
R
NOTE: The instructions in this manual are for the use of qualified individuals specially trained and experienced
in the installation and maintenance of this type of equipment and related system components. Installation and
service personnel are required by some states to be licensed. Persons not qualified shall not attempt to install,
service, or maintain this equipment.
This manual should be maintained in legible condition and kept adjacent to the heat pump pool heater or in a
safe place for future use.

Raypak 6350 Series Specifications

General

Brand	Raypak
Model	6350 Series
Category	Heat Pump
Language	English

Summary

Safety Warnings and Precautions

Health and Usage Guidelines

Electrical Connections

Controls and Indicators (Analog Models)

System Start-Up (Analog Models)

Controls (Digital Models)

Digital Control Operations

Heat/Cool Operation

System Start-Up and Maintenance

Troubleshooting Guide

Unit Running Issues

Covers scenarios where the unit runs but does not heat, or does not run at all, including airflow and blanket use.

Power, Water Flow, and Time Clock

Digital Control Board Fault Codes

Lists and explains fault codes displayed on digital control boards for diagnosing problems.

Plumbing Diagrams

Wiring Diagrams

Single-Phase Analog Wiring

Shows the electrical wiring for single-phase analog control models operating at 208/230V.

Single-Phase Digital Wiring

Details the electrical connections for single-phase digital control models operating at 208/230V.

Three-Phase Analog Wiring

Illustrates the wiring for three-phase analog control models operating at 208/230V.

Three-Phase Digital Wiring

Provides the electrical wiring for three-phase digital control models operating at 208/230V.

460V Three-Phase Analog Wiring

Remote Control Installation