Raypak Power Vent D2 - User Manual

INSTALLATION & OPERATING
INSTRUCTIONS
CATALOG NO. 6000.57F Effective: 12-02-08 Replaces: 5-20-08 P/N 241086 Rev. 7
WARNING: If these instructions are not followed exactly, a fire or explosion may
result causing property damage, personal injury or death
.
FOR YOUR SAFETY: Do not store or use gasoline or other flammable vapors and
liquids or other combustible materials in the vicinity of this or any other appliance. To
do so may result in an explosion or fire.
WHAT TO DO IF YOU SMELL GAS:
• Do not try to light any appliance.
• Do not touch any electrical switch; do not use any phone in your building.
• Immediately call your gas supplier from a neighbor's phone. Follow the gas
supplier's instructions.
• If you cannot reach your gas supplier, call the fire department.
Installation and service must be performed by a qualified installer, service agency or
the gas supplier.
This manual should be maintained in legible condition and kept adjacent to the heater or in another safe place for
future reference.
For 181/182, 260/261, 330/331 &
400/401 – Boilers & Water Heaters
D-2
Power
Vent

Summary

Warnings

Pay Attention to These Terms

Defines hazard level indicators like DANGER, WARNING, CAUTION, and NOTE for safety and operational guidance.

Receiving Equipment

General Specifications

Installation

Mounting the Assembly

Step-by-step guide on how to attach the Power Vent to the heater unit, including removing existing components.

Wiring a Power Vent Assembly to an Appliance with IID Ignition

Venting

Wiring Diagrams-182-260 H4;WH1 (Atmospheric)

181-261 H4;WH1 (Low NOx)

Sequence of Operation

Start Up Procedures

Draft Proving Switch

Illustrated Parts List

Raypak Power Vent D2 Specifications

General

Brand	Raypak
Model	Power Vent D2
Category	Ventilation Hood
Language	English