Need help?Do you have a question about the Raytheon Anschütz 108-010.NG001 E01 and is the answer not in the manual?
General| Type | Gyro Compass |
|---|---|
| Manufacturer | Raytheon Anschütz |
| Model | 108-010.NG001 E01 |
| Power Supply | 24 V DC |
| Operating Temperature | -15°C to +55°C |
| Storage Temperature | -25°C to +70°C |
Manual serves as a reference for operating the equipment.
Explains symbols used in the manual for warnings and cautions.
Provides safety guidelines for operation and adherence to regulations.
Details precautions for handling ESD sensitive components and protected areas.
Explains the magnetic sonde's function of converting visual compass data to an electrical signal.
Illustrates the system's hardware components with identification numbers.
Shows the location of the label on the magnetic sonde unit.
Lists key specifications like dimensions, weight, and operating temperature.
Describes the physical construction and connection method of the sonde.
Notes the absence of dedicated operating elements or indicators on the device.
Covers normal operation and states no emergency operation function exists.
States that the system comprises no outfit or accessories.
Warns against improper operation and operation by unskilled personnel.
Covers pre-operation and setting into operation procedures.
Explains normal operation is managed via the connected system.
Details procedures for setting out of operation and post-operation.
States that the system has no emergency operation function.
Lists common failures, their possible causes, and recommended remedies.
Provides safety warnings for maintenance and electrical current hazards.
Explains how to reference the Illustrated Spare Parts Catalog (ISPC).
Lists necessary tools, measurement, and test equipment for tasks.
Lists required consumables for maintenance procedures.
Details the requirements and procedure for installing the magnetic sonde.
Provides the step-by-step procedure for installing the junction box.
Explains how to connect the magnetic sonde to the related system.
Describes the procedure for changing the sense of rotation of the magnetic sonde.
Details the procedure for adjusting the magnetic sonde for accuracy.
Covers various repair procedures for the magnetic sonde.
Outlines the steps for performing a functional test on the magnetic sonde.
Provides instructions on how to safely remove the magnetic sonde from its mounting.
Details procedures for replacing specific magnetic sonde models.
Details procedures for replacing holders for specific sonde models, including NG001, NG002, NG003, NG004 and their E01 variants.
Provides the steps required to replace the junction box.
Covers preservation, packing, and storage conditions for the device.
Details regulations and environmental conditions for transporting the device.
To Next Page
