TM 03-006-UG
Copyright © 2004 Raytheon Company ALL RIGHTS RESERVED
30 Revision -
To camp-on a busy number, the Camp-On feature must be defined for the instrument at the switch database
and camp-on requested as follows:
a. When dialed telephone number is busy, press RECALL DIAL key on telephone and listen for dial tone.
b. Dial #23, then hang up.
When busy SDN clears, the telephone rings, and green LED on line button flashes.
c. Lift handset.
d. Locate and press telephone line button with flashing green LED.
NOTE
If the telephone has the home key defined and that is the line that is ringing, it
answers automatically when the user goes off hook.
e. Press PTT on handset and begin talking.
f. When call is complete, either hang up handset or press RELEASE key on the telephone.
4.2.13 Using Call Park
To park an incoming call to be retrieved from another phone:
a. Press RECALL DIAL key. Listen for confirmation tone followed by dial tone.
b. Enter #28, then unique four-digit number. Listen for confirmation tone, then hang up.
4.2.14 Unparking a Call
To unpark a call:
NOTE
A parked call may be retrieved at any properly class-marked phone. The number used for call parking
does not have to appear on the phone used for unparking.
a. Identify and press an idle line button. Listen for dial tone.
b. Enter *28, followed by unique four-digit number used to park the call.
c. Listen for confirmation tone, then begin talking.
To Next Page
Loading...