BT240 Product Manual
V1.0 RayTools AG. Copy Right 4 | 15
www.raytools.net
center the beam.
2） Module ATP： aiming at laser heads with paralleled beam(not need to be collimated), adjust the angles
of the beam (beam centering).
3） Module FM: focus the collimated light beam to high-power-density focused light beam, and move ups
and downs to set the focal point.
4） Module WM: protect the optics, protect the focusing lens from being damaged by residues and
lengthen the life span of the optics.
5） Module TM: guide the focused light beam to the processing workpiece and spray high-speed gas flow
to achieve high-quality cutting.
To Next Page
Loading...
