7. SAFETY AND MAINTENANCE
SAFETY GUIDELINES
In order to achieve maximum safety while using your Razer Chroma Light Strip Set, we suggest that
you adopt the following guidelines:
▪ Should you have trouble operating the device properly and troubleshooting does not work,
unplug the device and contact the Razer hotline or go to support.razer.com for support. Don’t
attempt to service or fix the device yourself at any time.
▪ Don’t take apart the device and don’t attempt to operate it under abnormal current loads.
Doing so may void your warranty.
▪ Only use accessories provided with the device and only purchase accessories made and/or
approved by Razer.
▪ Power off the device before making any relocation, modifications, and/or
connecting/disconnecting any component.
▪ Always handle all included accessories with care. When plugging or unplugging any accessory,
always grip its plug/connector.
▪ When connecting LED strips to the device please power off and unplug the device to avoid
electric shocks.
▪ Don’t use or install the device and its components near water, moisture, solvents, or other wet
surfaces, nor expose these components to high temperatures or direct sunlight.
▪ Keep the device and its components away from liquid, humidity or moisture. Operate the
device and its components only within the specific temperature range of 0°C (32°F) to 40°C
(104°F). Should the temperature exceed this range, unplug and switch off the device in order
to let the temperature stabilize to an optimal level.
MAINTENANCE AND USE
The Razer Chroma Light Strip Set requires minimum maintenance to keep it in optimum condition.
Once a month we recommend you unplug the device from the computer, unplug all connected
components, and clean it using a soft cloth or cotton swab to prevent dirt buildup. Do not use soap or
harsh cleaning agents.
To Next Page
