Quickly change profiles to load a new set of function assignments. An on-screen notification will
appear whenever you switch profiles.
▪ Next / Previous Profile. Switch to the next or previous profile until the last or first profile on
the profile list.
▪ Cycle Up / Cycle Down Profile. Cycle to the next or previous profile on the profile list.
▪ Specific Profile. Switch to a specific profile. You can also set a Chroma Effect to activate
upon switching to the preferred profile.
Switch Lighting
Switch between all advanced lighting effects you've configured on the Chroma Studio module.
▪ Cycle Up / Cycle Down Profile. Cycle to the next or previous advanced lighting effect on
the profile list.
▪ Specific Profile. Switch to a specific advanced lighting effect.
This function will only be visible when the Chroma Studio module is installed.
Brightness
Adjust the brightness of all Razer Synapse devices or toggle them all off.
Launch Program
Open an app or a website.
Razer Hypershift
Set a control to activate Hypershift mode as long as it's held down.
Multimedia
Assign multimedia controls to your Razer device. Listed below are the multimedia controls you can
choose from:
▪ Volume Down. Decrease the audio output.
▪ Volume Up. Increase the audio output.
▪ Mute Volume. Mute the audio.
▪ Mic Volume Up. Increase the microphone volume.
▪ Mic Volume Down. Decrease the microphone volume.