HEADLIN E
Need Help? Visit our website for product support, a list of authorized service centers in the US and customer service contact information at www.razor.com.
Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service contact information is
listed at the back of this manual.
5
HEADLINE
5
ASSEMBLY AND SET-UP
Unfolding the Scooter for First Time Use
Note: Remove plastic covers on rear axle bolt before
unfolding scooter.
1 To release the folding mechanism, place the scooter
on the ground. Pull the Anti-Rattle knob up to raise T-bar.
Turn knob completely counterclockwise then continuing
raising T-bar until T-bar is locked in the upright position.
Note: To activate the Anti-Rattle feature, turn the knob clockwise. Note there is no need to overtighten.
To fold, loosen the Anti-Rattle knob (by turning knob counterclockwise) prior to pulling up the
Anti-Rattle knob to release the folding mechanism. For instructions on folding see page 9.
2 Turn knob clockwise to tighten and engage the Anti-
Rattle mechanism.
WARNING: Keep fingers
clear of the pivoting mechanism
when folding or unfolding the
scooter. Make sure others are
standing clear.
To Next Page
Loading...
Need help?
General
