Razor E100 series User Manual

3 Inspect the brake pads (A) for proper alignment against the wheel or excess wear. To realign brake
pads, loosen the fixing nut (B) and adjust the pad to contact the rim. Re-tighten and readjust as
needed. Verify proper brake function prior to riding the scooter.
Replacing the Front Wheel
Tools Required: 10 mm Wrench and Two (2) 16 mm Wrenches.
1 Using a 10 mm wrench loosen the brake cable bolt.

Razor E100 series Specifications

General

Max Speed	10 mph (16 km/h)
Run Time	Up to 40 minutes of continuous use
Frame Material	Steel
Weight Limit	120 lbs (54 kg)
Age	8+
Throttle	Twist-grip throttle
Charge Time	12 hours
Motor	100-watt, high-torque, chain-driven motor
Battery	24V (two 12V) sealed lead acid rechargeable battery system
Brake	Hand-operated, front
Tires	8-inch pneumatic front tire
Deck	Full-size