Razor E300 HDL User Manual

HEADLINE
Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer
Service contact information is listed at the back of this manual.
7
USAGE
Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer
Service contact information is listed at the back of this manual.
7
How to Ride
Once you have charged the battery (see page 5 for charging information):
1. Turn power switch “ON”; put kickstand up and place both hands on the handlebars.
2. Headlight and Taillight: To activate the headlight and taillight the product must be powered ON, as detailed
above in Step #1. Press the light button (A) once to activate the headlight and taillight. To deactivate the
headlight and taillight, press the light button once again.
3. Get on the scooter and place both hands on the handlebars. Kick to start (B), and then twist the throttle with the
right hand (C).
How to Operate
Do not activate the twist-grip throttle unless you are on the electric scooter and in a safe, outdoor
environment suitable for riding.
How to Stop
1. To stop, release the throttle (B) and apply the brake (C) until the product comes to a complete stop.
2. When the brake is applied the tail/brake light will glow brighter. The brake light is always functional and
independent of the other lights being activated.
3. Make sure to turn the product OFF after your ride is complete. Pressing the power switch (D) will turn the
product OFF completely.
WARNING:
The brake is capable of skidding
the rear wheel and throwing an
unsuspecting rider. Practice in an
open area free from obstacles until
you are familiar with the brake
function. Avoid skidding to a stop as
this can cause you to lose control
and/or damage the rear wheel.
Note: As an additional safety
feature, the scooter is designed to
cut power to the motor when the
hand brake is applied.
Note: Motor will re-engage,
(without having to kick start), if
brake is released and throttle is
engaged before scooter has slowed
down to under 3 mph (5 km/h).
Note: Practice riding only in wide
open areas clear from curbs,
parking blocks and other obstacles.
Impacting the wheels against
any hard surface can damage the
wheels. Wheels are not covered
under the limited warranty.
Note: Electric scooter must be
moving at least 3 mph (5 km/h)
while engaging throttle to
engage motor.
2 3
A
C
B
B
C
1
D

Razor E300 HDL Specifications

General

Brand	Razor
Model	E300 HDL
Category	Scooter
Language	English