HEADLINE
7
USAGE
7
How to Ride
Once you have charged the battery (see page 6 for charging information):
1. Turn power switch “ON”; put kickstand up and place both hands on the handlebars.
2. Place both hands on the handlebars and place one foot on deck plate. Push scooter forward with other foot while
applying the throttle with right hand (A). Place other foot on deck plate once scooter is in motion.
How to Operate
Do not activate the twist-grip throttle unless you are on the electric scooter and in a safe, outdoor
environment suitable for riding.
How to Stop
1. To stop, release the throttle (A) and apply the brake, by squeezing the brake lever (B) until the product comes to a
complete stop.
2. Make sure to turn the product OFF after your ride is complete. Pressing the power switch (C) will turn the
product OFF completely.
WARNING: The brake is
capable of skidding the rear tire
and throwing an unsuspecting rider.
Practice in an open area free from
obstacles until you are familiar with
the brake function. Avoid skidding to
a stop as this can cause you to lose
control and/or damage the rear tire.
Note: As an additional safety
feature, the scooter is designed to
cut power to the motor when the
hand brake is applied.
Note: Practice riding only in wide
open areas clear from curbs,
parking blocks and other obstacles.
Impacting the wheels against
any hard surface can damage the
wheels. Wheels are not covered
under the limited warranty.
A
A
B
C
To Next Page
Loading...
