Razor eSpark

10
TROUBLESHOOTING GUIDE
Sometimes the scooter
doesn’t run, but other
times it does
Scooter makes loud
noises or grinding
sounds
Problem Possible Cause Solution
Loose wires or connectors
Motor or electrical switch
damage
Chain is too dry
Check all wires around the motor and all connectors to make sure
they are tight.
Contact your local Razor authorized service center for diagnosis and
repair.
Apply a lubricant such as 3 in 1
TM
or Tri-Flow
TM
to the chain.
For more helpful troubleshooting guides, visit us at www.razor.com.