Need Help? Visit our website at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00am - 5:00pm Pacific Time.
4
Step 11
Reverse the steps.
• Place the throttle in place and secure it back in place, clean the grip from any water or lubricant an re-install.
• Reconnect the throttle to control module.
• Place the battery cover back on the unit.
• Refasten the screws that hold the battery cover in place.
• Place the fairing back on the unit and refasten the hex bolts.
ATTENTION: Charge battery 12 hours before using.
To Previous Page
Loading...
