Razor Pocket Mod Petite

10
REPAIR AND MAINTENANCE
Front Wheel Replacement
Tools Required: Two (2) 14 mm Wrenches
1 Remove the nuts on both sides of
the front axle using a 14 mm wrench
then remove the lock washers and
remove the wheel from the fork.
4 Tighten the nuts using two (2)
14 mm wrenches.
3 Insert tab on the lock washer (B)
into the hole (A) on the front fork and
then place the nuts (C) on top of the
lock washer (B).
2 Insert the new wheel into the
front fork with the lock washers on
the outside of the fork. See step #3.
A
B
C