How to troubleshoot no sound from RBH Sound speakers?
If you're not getting any sound from your RBH Sound speakers, here's what to check: * First, ensure the speaker wire is properly connected to both the speaker and the amplifier, paying attention to the correct polarity. * Next, verify that the appropriate speaker selector is activated on your amplifier.
Why is there very little bass and/or imaging from my RBH Sound speakers?
If you're experiencing very little bass or poor imaging with your RBH Sound speakers, the issue might be that the speakers are wired out of phase. You should check the entire system for correct polarity and adjust as needed.
What to do if there is no sound from one RBH Sound speaker?
If you're only getting sound from one RBH Sound speaker, here are a couple of things to investigate: * Make sure the balance control on your receiver or preamp is centered. * Check all the speaker wire connections at both the amplifier and the speakers to ensure they are completely connected.
To Next Page
General
