RCA 20V500T - Tv;Cable TV(CATV)

11
TV/Cable TV(CATV)
It is important for the TV to know what type of signal-Cable
TV (CATV) or a normal antenna you are using. Choose your
signal (Antenna or Cable):
1
Press MENU to see the main menu.
2
Press CH+ or CH- to highlight Setup.
3
Press OK to enter the Setup submenu.
4
TV/CATV is highlighted. Press VOL+ or VOL- to select
TV or CATV.
Choose CATV if you have Cable TV service. (See page 4
for connection details.) If you do not have Cable TV
service and you connected an antenna to the TV,
choose TV. (See page 5 for connection details.)
5
Press MENU repeatedly to exit the menu or the menu
will automatically disappear within a few seconds if
no buttons are pressed on the remote control.
Model 20V500T: If you have this model you will not
see the Sound menu option and your remote will not
have MTS or SOUND buttons.
Helpful Hint
When CATV is selected,
channels 1-125 are available.
When TV is selected, only
channels 2-69 are available.
You cannot select the Setup
menu if the TV is set to a video
input channel (FRNT). Press
INPUT repeatedly to get to
regular TV programming.
Sound
Preferences
Setup
Time
Main Menu
Picture
Manual
Auto Search
1
Add/Erase Erase
Setup
Down
TV/CATV
Sound
Time
Main Menu
Picture
Preferences
Setup
Channel
Favorite List
CATV
Manual
Auto Search
7
Add/Erase Erase
Setup
Down
TV/CATV
Channel
Favorite List
TV