RCA 20V500T - Manual Channel Tuning

13
Manual Channel Tuning
Manual Channel Tuning allows you to search for channels
that may have been missed during the Auto Search. For
example, if you are looking for a channel between 60 and
70, start the search at channel 60 and go up.
1
Press MENU to see the main menu.
2
Press CH+ or CH- to highlight Setup.
3
Press OK to enter the Setup submenu.
4
TV/CATV is highlighted. Press VOL+ or VOL- to select
TV or CATV (whichever you have). Details are on page
11.
5
Press CH+ or CH- repeatedly to highlight Channel.
6
Press VOL+ or VOL- to enter the channel number at
which you want to begin the search.
7
Press CH+ or CH- repeatedly to select Manual.
8
Press VOL+ to start searching upward (for example,
starting at channel 60 and going up to 61, 62, 63,
etc.). Press VOL- when you find the channel you
want. This stops the search. Otherwise the search will
stop at the first available channel.
Or, press VOL- to start searching downward (for
example, starting at channel 60 and going down to
59, 58, 57, etc.). Press VOL+ when you find the
channel you want. This stops the search. Otherwise
the search will stop at the first available channel.
9
Press MENU repeatedly to exit the menu or the menu
will automatically disappear within a few seconds if
no buttons are pressed on the remote control.
Model 20V500T: If you have this model you will not
see the Sound menu option and your remote will not
have MTS or SOUND buttons.
Helpful Hint
You cannot select the Setup
menu if the TV is set to a video
input channel (FRNT). Press
INPUT repeatedly to get to
regular TV programming.
Manual
60
Add/Erase Erase
Setup
Down
TV/CATV
Sound
Time
Main Menu
Picture
Preferences
Setup
Channel
Favorite List
CATV
Auto Search
Manual
Add/Erase Erase
Setup
Down
TV/CATV
Channel
Favorite List
CATV
Auto Search
60
Add/Erase Erase
Setup
TV/CATV
Channel
Favorite List
CATV
Auto Search
60
Manual
Down
Add/Erase Erase
Setup
TV/CATV
Channel
Favorite List
CATV
Auto Search
60
Manual
Up
Preferences
Setup
Time
Main Menu
Picture
Sound