22
RECORD LENGTH 0:00
CH 04
Press REC to set length
Express Display on
TV Screen
Press Recording
REC Time
0:30 (30 Min)
1:00 (1 Hr)
1:30 (1 Hr, 30 Min)
2:00 (2 Hrs)
3:00 (3 Hrs)
4:00 (4 Hrs)
0:00 (XPR Turns Off)
Express Recording (XPR)
Express recording lets you record up to four hours without using the timer program feature.
The VCR will turn off automatically at the end of the recording.
1. Press VCR1 on the remote to turn on the VCR, audio/video receiver, TV, and tune the TV
to channel 91 (Input 1). This also sets the remote to control the VCR.
2. Insert a blank tape with safety tab in place.
3. Select a recording speed (SP, LP, or SLP) using the SPEED button on the VCR or
VCRÕs remote.
4. Press CHANNEL up or down on the remote to select the channel to be recorded.
5. Press REC on the remote once to activate normal recording. Repeatedly press REC
until the amount of express recording time is displayed on the TV screen. Each press of
REC increases the time 30 minutes up to 4 hours.
6. Press REC to display the time remaining on the TV screen. Press REC again to increase
the amount of recording time.
Using Your VCR
(Continued)
Stopping an Express Recording in Progress
1. Press VCR1 and then STOP within a few seconds on the remote or press POWER and
then STOP within a few seconds on the VCR.
To Next Page
Loading...
Need help?
General
