RCA 27V510T

4 Chapter 1
Graphics contained within this publication are for representation only.
Connections & Setup
TV + DVD
1. Connect your DVD Player to your TV.
A. Connect the audio (white and red) cables to the R and L/MONO AUDIO jacks on the back of the
TV and to the Audio Output jacks on the DVD player.
B. If your DVD player has an S-Video jack, connect an S-Video cable to the S-VIDEO jack on the
back of the TV and to the S-Video jack on the DVD player. If your DVD player doesn’t have an
S-Video jack, go to C.
-OR-
C. Connect a video cable (yellow) to the VIDEO jack on the back of the TV and to the Video Output
Jack on the DVD player.
2. Make sure cable or antenna is connected to your TV.
Connect the coaxial cable from your cable outlet or antenna to the TV ANT jack on your TV.
Go to page 6
R
L/MONO
AUDIO
VIDEO
S-VIDEO IN
VIDEO 1
TV (back panel)
R
TV ANT
DVD
S-VIDEO
L
R
VIDEO
OUT
From Cable
or Antenna
R
1A
2
1B
1634765A.01_C&S 4/22/04, 9:25 PM4