RCA 27V510T

Chapter 1 5
Graphics contained within this publication are for representation only.
Connections & Setup
Explanation of Jacks
This section describes the jacks you can use to make connections. There are several
ways to connect components to your TV.
TV ANT Lets you connect a coaxial cable to receive the signal from the antenna,
cable, or cable box.
VIDEO 1
Lets you connect a component such as a VCR or DVD player.
• R (Right) AUDIO Provides right audio connection. The
right audio connector is usually red.
• L/MONO AUDIO Provides left audio connection. The
left audio connector is usually white.
• VIDEO Provides composite video connection. The video
connector is usually yellow.
• S-VIDEO IN Provides better picture quality than the
video jacks because the color part of the signal is
separated from the black and white part of the picture.
When using S-VIDEO IN, make sure to connect left and
right audio cables to the R and L/MONO AUDIO jacks.
R
L/MONO
AUDIO
VIDEO
S-VIDEO IN
VIDEO 1
1634765A.01_C&S 4/22/04, 9:25 PM5