Controls and Indicators
Remote Control
POWER — (RCA models) —
Turns power on or off
(STANDBY mode). (Thomson
models) — keep pressing
briefly STANDBY mode to
enter ECO (power saving,
without clock display) mode.
TUNER — Selects tuner
CD — Selects CD player
TAPE — Selects tape player
AUX — Selects an external
input.
MUTE — Mutes volume
VOL+ or VOL- — Increases/
decreases volume
EQ PRESET — Selects equaliz-
er presets
HELP — Turns HELP mode
on/off
PLAY — Plays current CD
STOP — Stops playing CD
TRACK FWD — Increments CD track; searches
through CD
TRACK REV — Decrements CD track; searches
through CD
(Press TRACK FWD/ REV to tune up/ down tuner
frequency)
DISC SKIP — Skips to next CD
REPEAT —(REPEAT/RDS — Thomson models)
Repeats a track, CD, or all CDs. When the radio is
active, displays RDS information
PAUSE — Pauses the CD
SHUFFLE (MIX/PTY SEARCH — Thomson models)
— Turns on/off random listening
BASS B. — Turns on or off Bass Boost
SLEEP — Press to select the time interval in
minute before the unit turns off.
PRESET UP/DOWN — Selects next/ previous preset
station
SURROUND — Activates X- SURROUND (only for
RS2521, RS2522, RS3520, RS3522, A3200, A3205,
A3400). Otherwise, does not function in this unit.
RECORD — does not function in this unit
BASS B.
Tape Player
6+2 RS2520, RS2521, RS2550, RS3520, RS3522
VTCD550, A3000, A3005
6+5 A3200, A3205, A3400
6+2 and 6+5 tape controls include:
RECORD
PLAY
REWIND
FAST-FORWARD
STOP/EJECT
PAUSE
Tip: In STANDBY mode (press
POWER off), the system displays
the time. Press POWER to turn
the system on in the previously
used mode. Press CD, TAPE,
TUNER, or A U X to select the corresponding
mode. Look at the display icons to identify
the current mode.
EN
4
Tip: Depending on your system model, your
tape drive is
either controlled
by 6+2 or 6+5
mechanical but-
tons located
below the decks.
To Next Page
Loading...
