3
English
ANT1650
Built-In
Coaxial Cable
Amplifier
Insert
ANTENNA
TV/STB
TV
To connect the antenna with the
amplifi er directly to your TV:
1. Make sure your TV is turned off.
2. Connect the antenna’s built-in cable to
the input jack of the amplifi er.
3. Connect the amplifi er’s built-in cable to
the antenna input on your TV.
4. Plug the amplifi er’s power cord into an
electrical outlet.
5. Re-scan for channels on your TV.
2
To connect the antenna without the
amplifi er directly to your TV:
1. Make sure your TV is turned off.
2. Connect the antenna’s built-in coaxial
cable to the antenna input on your TV.
3. Re-scan for channels on your TV.
Connecting the Antenna
You can use the antenna with or without its amplifi er, depending on which connection
gives you the best signal. Try using the amplifi er fi rst. If you notice that you’ve lost channels
that you normally receive, try connecting without the amplifi er.
You can connect the antenna directly to your TV or use it with a converter box.
3 4
5
Built-In
Coaxial Cable
ANT1650
TV
2
3
antenna
antenna
To Next Page
Loading...
Need help?
General
