RCA CC174

The approximate time remaining on the tape in the camcorder is automatically
displayed in the viewfinder. The TC-2O/TC-30 switch must be set to the correct
position before the camcorder can correctly calculate time remaining.
CAMERA/PLAY
Switch in CAMERA
\
TC-2O/TC30 Switch
Time-Remair
TAPE END
90MIN
Display in Viewfinder
g Display
-9OMIN
1
89MIN
i
I
I
3M*I N
L
2MIN
(Flashing)
I
IMIN
(Flashing)
1
OMIN
(Flashing)
Set the TC-2O/TC30 Switch
Before recording, set the TC-20/K-30
switch for the size of tape you are using.
l
Select TC-20 when using a tape with
20-minutes or less recording time
when using SP recording speed.
l Select TC-30 when using a tape with
more than 20-minutes recording time
using SP recording speed.
The time-remaining indicator will
start
flashing when the remaining tape time
reaches two minutes.
TAPE END appears when the tape
reaches its end during recording or
when
a cassette is loaded whose tape is
already
at its end.
Note: The time-remaining display does not
work for TC-40 tapes.