51
Recording
Animation Recording (continued)
4. Rotate the menu PUSH dial down to
highlight REC TIME and press the
dial in to display the REC TIME
menu.
5. Rotate the menu PUSH dial to
highlight the amount of time you want
the camcorder to record.
• Select 1/4S to record for 1/4
second.
• Select 1/2S to record for 1/2
second.
• Select 1S to record for one second.
• Select 5S to record for five seconds.
• Select OFF if you do not want to
record for a selected amount of
time.
6. Press the menu PUSH dial twice to
exit the menu.
7. and the amount of recording time
appear in the viewfinder.
8. Press the thumb trigger to start
recording.
Note: The recording stops automatically
after the selected period of recording time.
You might want to take two to five shots of
the subject in the same position.
9. Move the subject and repeat step 8 for
the desired number of shots.
Note: Fade does not operate during animation
or time-lapse recording.
To Stop Animation Recording
Set the REC TIME in the menu to OFF.
To Next Page
Loading...
Need help?
General
