RCA CC6262

Recording
54
To Turn the Tally Light On or Off
1. Set the POWER switch to CAMERA
MAN.
2. Press the MENU/DISPLAY button to
display the menu in the viewfinder.
D. ZOOM is highlighted.
3. Rotate the menu PUSH dial down to
highlight TALLY LAMP and press it in
to display the TALLY LAMP menu.
Tally Light (Turn On or Off)
You can turn the tally light on or off using the menu.
Tally Light
4. Rotate the menu PUSH dial to
highlight OFF or ON. Press the
MENU dial twice to select ON or
OFF and remove the menus.
• Select ON if you want the tally
light to light during recording.
• Select OFF if you do not want the
tally light to light during recording.
PUSH
–
+
Menu PUSH Dial
(Rotate or Press In)
POWER Switch in
CAMERA MAN