First-Time Operation
7
9. Select a tape length.
5.Rotate the menu PUSH dial to
highlight the type of tape you are
using.
• Select T20 for a tape with 20
minutes or less recording time
in SP.
• Select T30 for a tape with 30
minutes recording time in SP.
• Select T40 for a tape with 40
minutes recording time in SP.
6.Press the menu PUSH dial twice
to select the tape length and
remove the menus from the
viewfinder.
• Details are on pages 24-25.
PUSH
–
+
(continued on next page)
POWER Switch and
Indicator
MENU/DISPLAY
Button
Menu PUSH Dial
(Rotate or Push In)
1. Set the POWER switch
to CAMERA MAN.
2.Press the MENU/DISPLAY button
to display the menu in the
viewfinder.
3. Rotate the menu PUSH dial to
highlight TAPE LENGTH.
4.Press the menu PUSH dial in to
display the TAPE LENGTH menu.
To Next Page
Loading...
Need help?
General
