RCA CC9360 - Use the LCD Monitor or Viewfinder to See Whats Recording

Connections & Setup
Chapter 1 13
Use the LCD monitor or viewfinder
to see what’s recording
Using the LCD monitor
1. Remove the lens cap.
2. Open the monitor 90˚ from the camcorder
body.
3. Tilt the monitor 180˚ forward or 90˚ down as
required for convenient viewing while
recording.
4. To adjust the brightness of the LCD monitor,
rotate the MENU dial.
Notes:
• Adjusting the LCD monitor brightness
does not affect the recorded image on
the tape.
• When the LCD monitor opens more
than 25˚, the viewfinder automatically
turns off. When the LCD monitor is
closed, the viewfinder automatically
turns on.
Using the viewfinder
1. Remove the lens cap.
2. Close the monitor.
Note: If the monitor is open more than 25˚,
the viewfinder turns off.
3. Adjust the viewfinder to a comfortable position.
4. Turn the eyepiece focus control to adjust the
focus of the viewfinder for your vision.
EXP
OSURE
BAC
K
LIGH
T
N
IGH
T
ALIVE
P.A E
M
ENU
/
BRIGHT
SN
AP
SH
OT
VO
L.
CHA
RGE
L
I
G
H
T
OFF
AUTO
ON
D
V
I
N
/
O
U
T
LCD monitor
MENU dial
B
L
A
N
K
S
E
A
R
C
H
F
O
C
U
S
+
+
BAT. RELEASE
Viewfinder
Eyepiece focus
control